SECONDS Cuff Links, nickel colour, 9mm pad, pair
SECONDS Cuff Links, nickel colour, 9mm pad, pair
- Quantity in stock: 270
- Product Code: 859-0815SEC
from
$0.48
$2.41
Ex Tax: $0.42
Ask a Question About This Product
Description
SECONDS Most have bent edges, or plating imperfections. The bent bits can often be straightened with a pair of pliers to create a flat surface for glueing. Ideal for class practise work, kids parties, etc.
Cuff Links, bright nickel plate over brass, 11mm pad. Angled pad.
Easy to use, just glue on your decoration. We recommend a light sanding to slightly roughen the surface, then 2-part epoxy glue to attach items to pad. Can also be soft-soldered.
People Also Bought
Stainless steel dispensing Needle tip for syringe, blunt end, 14 gauge (1.55mm ID, 1.84mm OD) x 1.5-Inch tubing length, standard helix luer lock. Fits..
from
$1.08
Ex Tax:$0.94
Needle tip for syringe, blunt end, 16 gauge (1.29mm), 1.5inch (38mm) long. These have the end blunted for use with the syringe for fine applicat..
from
$1.08
Ex Tax:$0.94
Needle tip for syringe, sharp end, 18 gauge (1.02mm), hypodermic needle. Sealed in sterile pack. These have sharp ends, please keep away from children..
from
$5.52
Ex Tax:$4.80
Plastic syringe, 3ml size. The luer slip syringe has a push taper fit.
All our needles will fit this syringe.
Handy to use for your craft projec..
from
$1.30
Ex Tax:$1.13
Plastic syringe, 50 - 60ml size. With luer lock screw-in needle fitting. All our needles will also fit this locking system, with a twist thread ..
from
$6.98
Ex Tax:$6.07
Needle tip for syringe, sharp end, 20 gauge (0.9mm), hypodermic needle. Sealed in sterile pack. These have sharp ends, please keep away from children...
from
$5.98
Ex Tax:$5.20
Plastic syringe, 5ml size. The luer slip syringe has a push taper fit. All our needles will fit this syringe.
Handy to use for your craft projects,..
from
$1.68 $2.40
Ex Tax:$1.46
SECONDS: these cuff links are imperfect. Some have bent flat pads. Some are customised by crunch. Some are slightly off-center. ..
from
$0.92 $3.08
Ex Tax:$0.80
Brooch Back, approx 40mm, (1.5 inch) roller catch, nickel plated. Holes in the back bar so the glue or solder can run through.
Great unit to glue y..
from
$0.63
Ex Tax:$0.55
Brooch Back, approx 40mm, (1.5 inch) roller catch. Antiqued brass plated. Holes in the back bar so the glue or solder can run through, or for stitchin..
from
$0.63
Ex Tax:$0.55