NEW STOCK! Brooch Back, 316 Surgical Steel, hook catch, 14mm
NEW STOCK! Brooch Back, 316 Surgical Steel, hook catch, 14mm
- Quantity in stock: 772
- Product Code: 848-0365
from
$0.83
Ex Tax: $0.72
20 or more $0.71
50 or more $0.58
100 or more $0.50
Ask a Question About This Product
Description
Specifications
Related Products
19mm (0.75 inch), 316 Surgical Steel, Brooch Back, 5mm wide, with a hook catch. Surgical stainless steel.
Two large holes in back for glue or solde..
from
$0.86
Ex Tax:$0.75
Out Of Stock
Brooch Back, 21mm or 3/4 inch, roller catch, 304 stainless steel. Two holes in the back bar so the glue or solder can run through, or for stitching.
..
from
$1.50
Ex Tax:$1.30
Out Of Stock
This item is temporarily out of stock, and please check back later.
16mm (0.6 inch, or 5/8ths inch) 304 Stainless Steel Brooch Back, 5m..
from
$0.83
Ex Tax:$0.72
32mm (1.25 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel.
Three large holes in back for glue or solder.
Great unit..
from
$0.86
Ex Tax:$0.75
25mm (1 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel. Two large holes in back for glue or solder.
Great unit to glue..
from
$0.86
Ex Tax:$0.75
People Also Bought
19mm (0.75 inch), 316 Surgical Steel, Brooch Back, 5mm wide, with a hook catch. Surgical stainless steel.
Two large holes in back for glue or solde..
from
$0.86
Ex Tax:$0.75
Out Of Stock
This item is temporarily out of stock, and please check back later.
16mm (0.6 inch, or 5/8ths inch) 304 Stainless Steel Brooch Back, 5m..
from
$0.83
Ex Tax:$0.72
25mm (1 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel. Two large holes in back for glue or solder.
Great unit to glue..
from
$0.86
Ex Tax:$0.75
Brooch Back, approx 40mm, (1.5 inch) roller catch. Antiqued brass plated. Holes in the back bar so the glue or solder can run through, or for stitchin..
from
$0.63
Ex Tax:$0.55
16mm (0.6 inch, or 5/8ths inch) Brooch Back, 5mm wide, 5mm thick, with a hook catch. Nickel plate.
Great unit to glue your small ideas on to. It ca..
from
$0.49
Ex Tax:$0.43
Good quality Stick Pin End, nickel plate over brass.
These have a rubber insert in them so that when they are pushed onto the sharp point the..
from
$0.56
Ex Tax:$0.48
SECONDS: due to either the pin might be off the centre a bit, or the plating on the back of the pad is not perfect.
Stick Pin, nickel p..
from
$0.45
Ex Tax:$0.39
Scroll back for studs, nickel free silver plated over brass base metal.
Approx 3.8mm wide x 5mm long, hole: 0.9mm
Sold and priced per pair...
from
$0.38
Ex Tax:$0.33
Clutch Back 12mm, silver plated.
Pin and pad listed separately, see below.
priced and sold by: each ..
from
$0.47
Ex Tax:$0.41
Tie Tack 10mm Pad with 10mm pin, silver plated over brass. Great unit to glue your ideas on to. Not just a tie tack it can be used for a lapel pin, ha..
from
$0.53
Ex Tax:$0.46