Brooch Back, 316 stainless steel, hook catch, 32mm (1.25 inch)
Brooch Back, 316 stainless steel, hook catch, 32mm (1.25 inch)
- Quantity in stock: 192
- Product Code: 848-7710
from
$0.86
Ex Tax: $0.75
20 or more $0.82
50 or more $0.79
100 or more $0.75
Ask a Question About This Product
Description
32mm (1.25 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel.
Three large holes in back for glue or solder.
Great unit to glue your ideas on to. It can be used for a lapel Brooch, hat Brooch, a badge Brooch, a school Brooch, a club Brooch, etc.
Glue interesting things onto it, like fabric, feathers, lace and beads; or like a little bit of wood, paint it and then glue feathers and beads around it, and resell them or give them away to friends.
Use epoxy glue for max strength, rough up the surface a little first with fine sand paper.
Specifications
| Stainless Steel | |
| Stainless Steel | High quality stainless steel is a great alternative to nickel colour base metal parts, because it looks similar, is durable, does not rust, change colour or tarnish, and will last a lifetime. |
Related Products
19mm (0.75 inch), 316 Surgical Steel, Brooch Back, 5mm wide, with a hook catch. Surgical stainless steel.
Two large holes in back for glue or solde..
from
$0.86
Ex Tax:$0.75
Brooch Back, 21mm or 3/4 inch, roller catch, 304 stainless steel. Two holes in the back bar so the glue or solder can run through, or for stitching.
..
from
$1.50
Ex Tax:$1.30
This item is temporarily out of stock, and please check back later.
16mm (0.6 inch, or 5/8ths inch) 304 Stainless Steel Brooch Back, 5m..
from
$0.83
Ex Tax:$0.72
14mm 316 Surgical Steel Brooch Back, 5mm wide, 5mm thick, with a hook catch.
Great unit to glue your small ideas on to. It can be used for a lapel ..
from
$0.83
Ex Tax:$0.72
25mm (1 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel. Two large holes in back for glue or solder.
Great unit to glue..
from
$0.86
Ex Tax:$0.75
People Also Bought
28mm (1 inch) brooch back, with a simple hook-in clasp. Antiqued brass plated. Holes in the back bar so the glue or solder can run through, or for sti..
from
$0.69
Ex Tax:$0.60
45mm brooch back, with a simple hook-in clasp. Three holes in the back bar so the glue or solder can run through.
These brooch backs have a n..
from
$0.78
Ex Tax:$0.68
Smooth 2mm crimp beads.
OD (outside diameter: Approx 1.9mm
ID (inside diameter, or hole): 1.3mm
Bead length: 1.3mm
Base metal: Steel
Finish: Ni..
from
$2.28
Ex Tax:$1.98
Smooth 2mm crimp beads.
OD (outside diameter): 1.8mm dia x 1.3mm long
ID (inside diameter, or hole): 1.3mm
Bead length: 1.3mm
Base metal: Steel
..
from
$2.28
Ex Tax:$1.98
Parrot Clasp, also called Lobster Claw, 6mm x 10.3mm
Nickel free antiqued brass finish, over alloy base. Very nice wee clasps...
from
$0.41
Ex Tax:$0.36
Parrot Clasp, also called Lobster Claw, 6mm x 10.3mm
Nickel free silver plate finish, over alloy base. Very nice wee clasps...
from
$0.44
Ex Tax:$0.39
Tiger Tail, silver-grey, 0.7mm diameter, 20 metre roll, Budget..
from
$4.80
Ex Tax:$4.17
4mm flat-pad posts, surgical stainless steel, reinforced assembly.
Post: 10.8mm long with 0.69mm thick pin.
Sold and priced per ..
from
$0.66
Ex Tax:$0.57
Bezel setting, round tray. With one front facing loop. Fill with your cabochon, or image and resin, or small items and resin for mixed media jewellery..
from
$1.48
Ex Tax:$1.29
Bangle Wire, adjustable, approx 65mm inside diameter (63 - 67mm), 1.8mm diameter wire. Use to make your own alex and ani style Charm Bangle, attach ch..
from
$2.37 $4.75
Ex Tax:$2.06