Brooch Back, 304 Stainless Steel, hook catch, 16mm

Brooch Back, 304 Stainless Steel, hook catch, 16mm
Out Of Stock
Brooch Back, 304 Stainless Steel, hook catch, 16mm
  • Quantity in stock: Out Of Stock
  • Product Code: 848-0360
from
$0.83
Ex Tax: $0.72
20 or more $0.71
50 or more $0.58
100 or more $0.50

Description

This item is temporarily out of stock, and please check back later.  

16mm (0.6 inch, or 5/8ths inch) 304 Stainless Steel Brooch Back, 5mm wide, 5mm thick, with a hook catch.

Great unit to glue your small ideas on to. It can be used for a lapel Brooch, hat Brooch, a badge Brooch, a school Brooch, a club Brooch, etc. Glue interesting things onto it like a little bit of wood, paint it and then glue feathers and beads around it, and resell them or give them away to friends.

Use epoxy glue for max strength, rough up the surface a little first with fine sand paper.

Specifications

Stainless Steel
Stainless Steel High quality stainless steel is a great alternative to nickel colour base metal parts, because it looks similar, is durable, does not rust, change colour or tarnish, and will last a lifetime.

Related Products

19mm (0.75 inch), 316 Surgical Steel, Brooch Back, 5mm wide, with a hook catch. Surgical stainless steel. Two large holes in back for glue or solde..
from
$0.86
Ex Tax:$0.75
Add to Cart
Brooch Back, roller catch, 21mm, 304 stainless steel
Out Of Stock
Brooch Back, 21mm or 3/4 inch, roller catch, 304 stainless steel. Two holes in the back bar so the glue or solder can run through, or for stitching. ..
from
$1.50
Ex Tax:$1.30
Out Of Stock
32mm (1.25 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel. Three large holes in back for glue or solder. Great unit..
from
$0.86
Ex Tax:$0.75
Add to Cart
14mm 316 Surgical Steel Brooch Back, 5mm wide, 5mm thick, with a hook catch. Great unit to glue your small ideas on to. It can be used for a lapel ..
from
$0.83
Ex Tax:$0.72
Add to Cart
25mm (1 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel. Two large holes in back for glue or solder. Great unit to glue..
from
$0.86
Ex Tax:$0.75
Add to Cart

People Also Bought

Antiqued bronze colour connector, suitable for using with 1.5mm ball chain, listed separately. See related items. Approx measurements: 7mm long, 2.8mm..
from
$0.21
Ex Tax:$0.18
Add to Cart
  Chain, brass ball chain, 1.5mm nickel free antique bronze plate, by the metre. Bulk chain quantities may contain joiners. Buy by the metr..
from
$2.61
Ex Tax:$2.27
Add to Cart
Parrot Clasp, also called Lobster Claw, 6mm x 10.3mm Nickel free antiqued brass finish, over alloy base. Very nice wee clasps...
from
$0.41
Ex Tax:$0.36
Add to Cart
6mm flat-pad posts, surgical steel, reinforced assembly. Post: 11.12mm long with 0.72mm pin; pad 0.30mm thick.  Sold and priced per pair. ..
from
$0.66
Ex Tax:$0.57
Add to Cart
Round Jump Rings, suitable for chain maille. Made in USA. OD (outside diameter): 12mm ID (inside diameter - hole): 9mmWire thickness: 1.5mm dia / ..
from
$0.39
Ex Tax:$0.34
Add to Cart
16mm (0.6 inch, or 5/8ths inch) Brooch Back, 5mm wide, 5mm thick, with a hook catch. Nickel plate. Great unit to glue your small ideas on to. It ca..
from
$0.49
Ex Tax:$0.43
Add to Cart
Cast Oblong Bezel setting, antiqued bronze finish, base metal alloy. Fantastic thick sideways facing loop. Size: about 10mm x 50mm...
from
$2.27
Ex Tax:$1.97
Add to Cart
Clear rubber French wire earring hooks' keepers. 3x3.5mm. Keep earrings safe in the ear or secure on display cards. Priced and Sold By: per pair..
from
$0.21
Ex Tax:$0.18
Add to Cart
Sterling silver open Jump ring 7mm OD, 1.0mm diameter wire...
from
$2.73
Ex Tax:$2.37
Add to Cart
  Brooch Back, 21mm , roller catch, nickel plated. Two holes in the back bar so the glue or solder can run through, or for stitching. Gr..
from
$0.48
Ex Tax:$0.42
Add to Cart