Brooch Back, 316 Surgical Steel, hook catch, 19mm (0.75 inch)
Brooch Back, 316 Surgical Steel, hook catch, 19mm (0.75 inch)
- Quantity in stock: 763
- Product Code: 848-0295
from
$0.86
Ex Tax: $0.75
20 or more $0.74
50 or more $0.61
100 or more $0.52
Ask a Question About This Product
Description
19mm (0.75 inch), 316 Surgical Steel, Brooch Back, 5mm wide, with a hook catch. Surgical stainless steel.
Two large holes in back for glue or solder.
Great unit to glue your ideas on to. It can be used for a lapel Brooch, hat Brooch, a badge Brooch, a school Brooch, a club Brooch, etc.
Glue interesting things onto it, like fabric, feathers, lace and beads; or like a little bit of wood, paint it and then glue feathers and beads around it, and resell them or give them away to friends.
Use epoxy glue for max strength, rough up the surface a little first with fine sand paper.
Priced and sold by: each
Specifications
| Stainless Steel | |
| Stainless Steel | High quality stainless steel is a great alternative to nickel colour base metal parts, because it looks similar, is durable, does not rust, change colour or tarnish, and will last a lifetime. |
Related Products
Brooch Back, 21mm or 3/4 inch, roller catch, 304 stainless steel. Two holes in the back bar so the glue or solder can run through, or for stitching.
..
from
$1.50
Ex Tax:$1.30
This item is temporarily out of stock, and please check back later.
16mm (0.6 inch, or 5/8ths inch) 304 Stainless Steel Brooch Back, 5m..
from
$0.83
Ex Tax:$0.72
32mm (1.25 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel.
Three large holes in back for glue or solder.
Great unit..
from
$0.86
Ex Tax:$0.75
14mm 316 Surgical Steel Brooch Back, 5mm wide, 5mm thick, with a hook catch.
Great unit to glue your small ideas on to. It can be used for a lapel ..
from
$0.83
Ex Tax:$0.72
25mm (1 inch) Brooch Back, 4.7mm wide, with a hook catch. 316 grade stainless steel. Two large holes in back for glue or solder.
Great unit to glue..
from
$0.86
Ex Tax:$0.75
People Also Bought
Jump ring, round, 10mm OD, extra thick, nickel plate. Very firm.
OD (outside diameter): 10mm
ID (inside diameter, or hole): 6.3mm
Wire thickness:..
from
$0.20
Ex Tax:$0.17
Clutch Back 12mm, silver plated.
Pin and pad listed separately, see below.
priced and sold by: each ..
from
$0.47
Ex Tax:$0.41
Tie Tack 10mm Pad with 10mm pin, silver plated over brass. Great unit to glue your ideas on to. Not just a tie tack it can be used for a lapel pin, ha..
from
$0.53
Ex Tax:$0.46
Round Stainless Steel Jump Ring.
OD (outside diameter): 12mm nominal
ID (inside diameter: 8.12mm nominal
Wire diameter: 2.0mm
Base m..
from
$0.37
Ex Tax:$0.32
Industrial strength Adhesive for the crafter and jeweller. Flexible and paintable, E-6000 is a versatile adhesive and a must-have for every studio! Dr..
from
$6.58
Ex Tax:$5.72
Glue in a 3ml syringe, how handy is that! Great starter size, in a convenient medium dispenser.
This is Makers Glue, glue for people who make thing..
from
$2.63
Ex Tax:$2.28
8mm high quality flat-pad posts, 304 stainless steel, reinforced assembly.
Sizing: 10.4mm long pin with 0.73mm diameter wire. Comfortable bullet en..
from
$1.23
Ex Tax:$1.07
Discie stabilizer back, 304 stainless steel. Size: about 12mm in diameter, 7mm thick. They will take a 0.6mm diameter post.
Back for ear..
from
$0.55
Ex Tax:$0.48
Flat faux Suede Cord, White, 3mm wide, 1.5mm thick..
from
$1.45
Ex Tax:$1.26
French earring hooks, also called zulu hooks, or ear wires.
Base: Brass
Front leg: 18.95mm
Back leg: 19.29mm
Wire diameter: 0.7mm
Finish: Nicke..
from
$0.44
Ex Tax:$0.38