16mm Flat Brass Stamping Disc with one hole
16mm Flat Brass Stamping Disc with one hole
- Quantity in stock: 71
- Product Code: 581-7840
from
$1.21
Ex Tax: $1.05
20 or more $1.08
50 or more $0.98
100 or more $0.87
Ask a Question About This Product
Description
People Also Bought
Superior quality seamless metal Spacer / Filler rondelle bead.
OD (Outside diameter): 4.92mm, thickness: 2.88mm
Hole: 1.9mm
Base metal: 201 Stain..
from
$7.65
Ex Tax:$6.65
Plain flat stamping measuring approximately 20.07mm, 0.50mm thick. With one hole for hanging, make your own personalised pendants, earrings, wine..
from
$0.98
Ex Tax:$0.85
Tie Tack 6mm Pad with 10mm pin, antiqued brass finish over brass. Great unit to glue your ideas on to. Not just a tie tack it can be used for a lapel ..
from
$0.49
Ex Tax:$0.43
Clutch Back 12mm, antiqued brass
Pin and pad listed separately, see below.
Origin: Hong Kong..
from
$0.47
Ex Tax:$0.41
Tie Tack 10mm Pad with 10mm pin, antiqued brass finish over brass. Great unit to glue your ideas on to. Not just a tie tack it can be used for a lapel..
from
$0.53
Ex Tax:$0.46
SECONDS: due to either the pin might be off the centre a bit, or the plating on the back of the pad is not perfect.
Stick Pin, nickel p..
from
$0.09 $0.45
Ex Tax:$0.08
Good quality Stick Pin End, nickel plate over brass.
These have a rubber insert in them so that when they are pushed onto the sharp point the..
from
$0.56
Ex Tax:$0.48
SECONDS The tray has been soldered on slightly off-set. Good for practice, kids classes, random fun!
Ring Shank with bezel setting, inner tray 16mm..
from
$0.30 $1.52
Ex Tax:$0.27
Tie Tack 12mm cabochon bezel setting, complete unit with clutch back, antiqued bronze plated over brass base.
Glue in your image and dome, or choos..
from
$1.67
Ex Tax:$1.45
Finish: Unplated Stainless Steel.
Length: 2 inch (50mm)
Thickness: 0.6mm; Head measurement: 1.56mm (approx.)
Base: Stainless Stee..
from
$5.06
Ex Tax:$4.40