Discie stabiliser back, nickel free aluminium, pair
Discie stabiliser back, nickel free aluminium, pair
- Quantity in stock: 28
- Product Code: 841-0840
from
$1.27
Ex Tax: $1.10
20 or more $1.08
50 or more $0.89
100 or more $0.76
Ask a Question About This Product
Description
Related Products
8mm high quality flat-pad posts, 304 stainless steel, reinforced assembly.
Sizing: 10.4mm long pin with 0.73mm diameter wire. Comfortable bullet en..
from
$1.23
Ex Tax:$1.07
New Stock 304 Stainless steel Stud bezel finding, 10mm flat tray setting. Scroll backs available separately. Sold and priced per pair..
from
$1.48
Ex Tax:$1.29
Earring stud, 12mm pad, 10.96mm long pin. 304 stainless steel.
Sold and priced per pair.
Scroll backs listed separately, so you ..
from
$1.63
Ex Tax:$1.42
Ball posts with drop loop, side facing loop. Gold plated ball with stainless steel post. Post is 10.5mm long with 0.8mm diameter post wire. Loop is no..
from
$2.70
Ex Tax:$2.35
3mm high quality flat-pad posts, 304 stainless steel, reinforced assembly.
Standard post 10.4mm long with 0.73mm (21 gauge) diameter; pad 0.23mm th..
from
$1.15
Ex Tax:$1.00
304 Stainless steel Stud bezel finding, 8mm flat tray setting.
Scroll backs available separately.
Sold and priced per pair...
from
$1.48
Ex Tax:$1.29
DISCOUNT: Insignificant small mark on the pad, but it is there. 12mm high quality flat-pad posts; hanging pad with hole. 304 Stainless Stee..
from
$1.59
Ex Tax:$1.38
Oval flat-pad posts; hanging pad with hole, 304 Stainless Steel.
Size: about 12.75mm long, 6mm wide; pad 0.8mm thick; hole 1mm.
Sold..
from
$1.57
Ex Tax:$1.36
8mm flat pad posts, 304 stainless steel, reinforced assembly.
Pin length:11.4mm, Pin thickness: 0.65mm diameter thick; Pad thickness: 0.2..
from
$0.33 $0.55
Ex Tax:$0.29
10mm high quality flat-pad posts, stainless steel, reinforced assembly.
Standard post 10.4mm long with 0.73mm (21 gauge) diameter; pad 0.23mm thick..
from
$1.21
Ex Tax:$1.06
People Also Bought
Superior Quality Brooch Back, with hook catch, approx 32mm long (1.25 inch), 5mm wide, nickel plated.
Three holes in the back bar so the glue or so..
from
$0.67
Ex Tax:$0.58
Fold-over (clamshell) ends. Suitable for 1.5mm ball chain. A dab of glue will help to make secure. nickel free antiqued brass.
Jump ring goes throu..
from
$8.21
Ex Tax:$7.14
Round jump rings, extra large.
OD (outside diameter): 8mm
ID (inside diameter - hole): 6.5mm approx
Wire thickness: 1.0mm dia.
Base metal: Steel..
from
$6.69
Ex Tax:$5.82
8mm high quality flat-pad posts, 304 stainless steel, reinforced assembly.
Sizing: 10.4mm long pin with 0.73mm diameter wire. Comfortable bullet en..
from
$1.23
Ex Tax:$1.07
Extender Chain, 6cm (2.5 inch) silver plate over brass. Use this on the end of your necklace to make it extendable - one size fits all.
Finish: nic..
from
$0.95
Ex Tax:$0.83
Blue connector, suitable for using with 2.4mm ball chain, listed separately. See related items.
Base metal steel...
from
$0.21
Ex Tax:$0.18
Nickel free silver plated connector, suitable for using with 2.4mm ball chain, listed separately. See related items...
from
$0.21
Ex Tax:$0.18
0.8mm beading chain. Silver plate over brass. Sold per 5 metre Roll.
Solder ends or finish with crimps and charlottes. Made in China...
from
$9.86
Ex Tax:$8.57
Bezel setting, round tray. With front facing two loops, one on each side, integral - punched as one unit, the loops are not soldered on separately, th..
from
$0.59
Ex Tax:$0.51
Emery Tape Sanding Cloth Strip, use for lightly roughing the surface before glueing brooch backs, ring discs etc. 100mm x 37mm strip of 320 grit fine ..
from
$0.41
Ex Tax:$0.36