Hair Clip (bobby pin) with pad, antiqued copper plate. 50mm long, 7mm pad. Glue a button, bead or cabochon, felt flower or stitched creation onto the pad. No plastic tips on the ends.
Easy to use, just glue on your decoration. We recommend a light sanding to slightly roughen the surface with fine wet-and-dry sandpaper, then 2-part epoxy glue to attach items to pad. Can also be soft-soldered.
A note about the pads: When you glue something on top, make sure the glue goes through the holes to the clip to hold the whole unit together. This will also help make a strong join between the glue and your decoration.
Or, when you soft-solder a decoration on, ensure the solder flows through the holes to the clip. Same effect as with the glue, it will make a stronger join between the decoration and the base.
You should ensure the glue or solder goes right through to ensure a good join.
Hair Clip with 7mm pad, ant. copper plate, 50mm
- Product Code: 859-1727 Finish: Antiqued Copper
- Availability: 1
Priced and Sold By: Each
- Ex Tax: $0.40
- 20 or more $0.39
- 50 or more $0.32
- 100 or more $0.25